Flue Sizing - Tecnoflex (Turboflex Plus)
Tecnoflex (Turboflex Plus) is a twin skin flexible chimney liner designed for gas, oil and multifuel, where the maximum flue gas temperature does not exceed 600°C. Diameter range 80 - 400mm.
Product Description
Twin Wall Liner
• Both inner and outer layers made from corrosion-resistant 316L stainless steel. 904L stainless steel is also available as an option for the extreme conditions found with appliances like slumbering stoves.
• Corrugated outer skin for high crush resistance.
• Smooth inner skin resists corrosive attack due to easy drain down of condensate, less opportunity for soot collection and smooth surface for ease of sweeping.
• Inner skin remains overlapping to protect the joint from corrosion penetration even at minimum bending radius.
• Inner skin remains smooth and protective even after the rigours of installation
|
Adaptor [4015] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
Use in conjunction with Prima Plus 1mm Single Wall 90° and 135° tees to connect to Tecnoflex (Turboflex Plus). |
|||||||||||||
|
Joiner [4007] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
Suitable for use in joining lengths of Tecnoflex (Turboflex Plus) only when exceeding maximum coil length. |
|||||||||||||
|
Appliance Connector [4013] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
This item is used to connect from the appliance to Tecnoflex (Turboflex Plus). |
|||||||||||||
|
Top Clamp [4003] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
This item is used in conjunction with the top plate to secure the liner at the top of the stack. Can also be used as an intermediate support. |
|||||||||||||
|
Increase Adaptor [4014] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
This item is used to increase from Prima Plus 1mm Single Wall to the next diameter of Tecnoflex (Turboflex Plus). |
|||||||||||||
|
Top Plate [4002] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
This item is used in conjunction with the top clamp to support the liner at the top of the stack. Can also be used as an intermediate support and to be used as a debris plate above the appliance, gather unit or flue box. |
|||||||||||||
|
90° Tee with Drain [4005] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
|
Universal Terminal [7T42] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
This item is manufactured in accordance with the requirements of BS5440 and suitable for use on gas and oil applications only. |
|||||||||||||
|
135° Tee with Drain [4011] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
|
Gather Unit [4033] | ||||||||||||
|
IntØ (mm) | 180 |
200 |
||||||||||
|
Buttom Support Bracket [4009] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
For use where a tee is fitted to the base of the stack. Can also be used as an intermediate support |
|||||||||||||
|
Top Insert [4027] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
|
Nose Cone [4004] | ||||||||||||
|
IntØ (mm) | 125 | 155 | 180 | 200 | 230 | 250 | 300 | 350 | 400 | |||
For attaching to one end of Tecnoflex (Turboflex Plus) in order to facilitate the installation of the liner into the chimney stack. |
|||||||||||||
REGISTER HERE
Click here to register for Newsletters and also to gain access to various CAD drawings.
House of Flues
An interactive guide to help you select the best flue for each appliance around the home.
